Search results for " Titanium"
showing 10 items of 126 documents
Alcohol-Selective Oxidation in Water under Mild Conditions via a Novel Approach to Hybrid Composite Photocatalysts
2015
Abstract The oxidation of alcohols to carbonyl compounds in a clean fashion (i.e., with water as a solvent or under solvent‐free conditions, and using O2 or H2O2 as the primary oxidant) is the subject of considerable research efforts. A new approach for the selective oxidation of soluble aromatic alcohols in water under mild conditions via a novel composite photocatalyst has been developed. The catalyst is synthesized by grafting 4‐(4‐(4‐hydroxyphenylimino)cyclohexa‐2,5dienylideneamino)phenol and silver nanoparticles onto the surface of moderately crystalline titanium dioxide. The titanium dioxide‐based composite was first extensively characterized and then employed in the catalytic oxidati…
Effect of hydrogen on the ethylene polymerization process over Ziegler–Natta catalysts supported on MgCl2(THF)2. I. Studies of the chain‐transfer rea…
2001
The effect of hydrogen on the molecular weight of polyethylene obtained over vanadium catalysts (based on VCl4 and VOCl3) supported on MgCl2(THF)2 was studied and the results were compared to those obtained for similar titanium catalysts. It was confirmed that the dependencies of the transfer reaction on the hydrogen concentration are a half‐order in all investigated systems. However, the transition metal of the catalytic site affects the ratio of the transfer rate with hydrogen to the propagation rate (ktr,H/kp) and the results showed that hydrogen is a more effective agent of polyethylene molecular weight control in vanadium‐based systems as compared to the titanium catalyst.
Linker depletion for missing cluster defects in non-UiO Metal-Organic Frameworks
2021
Defect engineering is a valuable tool to tune the properties of metal–organic frameworks. However, defect chemistry remains still predominantly limited to UiO-type MOFs. We describe the preferential formation of missing cluster defects in heterometallic titanium–organic frameworks of the MUV-10 family when synthesised in sub-stoichiometric linker conditions. Our results show the value of integrating experimental work, computational modelling and thorough characterization in rationalizing the impact of defects over the porosity and structure of this family of materials. Correlation of experiment with computational models reveals the dominance of missing cluster vacancies in the pore size dis…
The Effect of surface topographical changes of two different surface treatments rotary instrument
2018
Background One of the major innovations in endodontics has been the introduction of nickel-titanium (NiTi) alloy. This study evaluated the surface topographical changes of two different surface treatments rotary instrument after instrumentation and sterilization. Material and Methods 240 Extracted teeth were included in this study. 90 new AlphaKite and Revo-S NiTi rotary instruments were selected and divided into two groups (Group A 45 AlphaKite and group B 45 Revo-S). Each group were divided into three subgroups: (A1, B1) n=5 files were used as a control, (A2,B2) n=20 files were used to prepare three root canals using endodontic rotary motor then sterilized by autoclave for one cycle under…
Researches Regarding the Usage of Titanium Alloys in Cranial Implants
2014
In the last few decades, the concept of flexible manufacturing has started to gain more and more attention, as an adaptation of production methods to the increasingly varied demands by customers. Therefore, new procedures have been introduced as alternatives to the classical ones, a very promising one being incremental forming [. A possible application for this new procedure, targeted by the authors of this paper, is the manufacturing of custom-shaped prosthetic parts for use in various areas of human medicine. Such prostheses can have a functional role, when they target the replacing of a functional component of the human body, or an esthetic role, when they target the solving of problems …
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…
Effects of weathering on the performance of self-cleaning photocatalytic paints
2019
Abstract The use of photocatalytic products for the surface coating of buildings is spreading more and more, because of the reduction of atmospheric pollutants and the colour maintenance of the paints over time with reduction of the maintenance costs and the improvement of the aesthetic appearance. The study reports the evaluation of the effects of the atmospheric conditions on three commercial photocatalytic paints containing TiO2. In particular tests were carried out by using samples subjected to accelerated aging inside a climate chamber and naturally aged by exposure for two years to the external environment of the city of Palermo (representative of a coastal environment of the Mediterr…
TITAFORM - Precision Hot Forming, development of innovative hot-forming processes of aeronautical components in Ti-alloy with low buy/fly ratio: an I…
2012
In the paper the description of the project TITAFORM is provided. The project has been financed on the call "PON Linea 1" of the Italian government and represents an effective example of cooperation between academy and industry. The project is focused on the beta forging and hot stretch forming operations of titanium alloys. �� 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Implant Abutment Cleaning by Plasma of Argon: 5-Year Follow-Up of a Randomized Controlled Trial.
2015
Contamination of implant abutments could potentially influence the peri-implant tissue inflammatory response. The aim of the present study is to assess the radiographic bone changes around customized, platform-switched abutments placed according to the "one-abutment-one-time" protocol, with and without plasma of argon cleaning treatment.Thirty healthy patients with thin gingival biotype (1 mm) and history of periodontal disease received one maxillary implant each. Immediately before abutment connection, patients were randomly assigned to control group (cleaning protocol by steaming) or test group (plasma of argon treatment). Outcome measures were: 1) success rate of implants and prostheses;…
Photocatalytic solar light H2 production by aqueous glucose reforming
2018
A series of tungsten and nitrogen doped Pt-TiO2 samples were prepared with the aim to extend the TiO2 absorption to the visible light region and to enhance the separation efficiency of the photogenerated electron/hole pairs. The physicochemical features of the powders were characterized by Xray diffraction (XRD), UV/Vis reflectance spectra, specific surface area (SSA) determinations, and transmission electron microscopy (TEM) analyses. The influence of the presence of different doping agents was evaluated, under anaerobic conditions, in the aqueous photo-reforming of glucose to form H2 at ambient pressure and temperature under a halogen lamp or natural solar light irradiation. Arabinose, er…